|
|
|
NO LONGER AVAILABLE!
The irriGuard™
system is designed to work with an existing sprinkler/irrigation system to
shutoff the system when watering is unnecessary. The irriGuard™
system monitors and displays the outside temperature and rainfall and uses
this information to control your sprinklers.
Includes:
|
|
Outdoor Temperature/Rain
Sensor
-
Transmits 300ft in clear
site
-
Precisely
quantifies and displays rainfall received and outside temperature
-
Fast
response with no false alarms
-
Unique
wireless reporting to ensure correct data
-
Utilizes
research-grade technology to measure rainfall and temperature
-
Self
emptying
-
Side
mounting bracket (included)
-
Powered
by 9volt battery (lithium recommended)
-
Transmits every 1.5
minutes
-
Accuracy: Rain Gauge:
+/-5% at 1" per hour, Temperature: +/-3% (direct sunlight may
distort readings)
|
|
|
Sprinkler Controller
-
Acts
as the data server, constantly listening to the other two devices for
new data to store or data requests to answer
-
Interprets
and manages the incoming information from both the display and the
rain gauge while using this data to regulate the existing
irrigation/sprinkler system
-
Receives and
stores the user-defined information from the display such as the rain
set point, temperature set point, and the delay
-
Receives and
stores the weather information from the rain gauge such as rainfall
accumulation and current temperature
- Works with virtually all sprinkler
timers or controllers
- Combined rain / freeze shutoff
capability for any sprinkler system
- Indicators for power and lockout
- Externally powered by the existing
sprinkler controller
- Transmits every 1.5 minutes
|
|
|
Wireless In-Home Display
- Set your sprinkler
control parameters while also monitoring current and past weather data
- Allows you to monitor the current and
past rainfall, outside temperature, and the present date and time
- Set the shutoff or lockout point of your
sprinklers for rainfall and temperature
- Display also includes indicators to
notify you of current lockout conditions, low batteries, or poor
signal strength from the remote units
- Powered by 9V battery lithium battery
recommended
|
|
|
|
 |
 |
|
|
